Seeking a 6-month End-of-Studies Internship (PFE) — Starting Early 2027
Mohamed Amine RAACHE
Electronics Engineer | Master 2 ICS — Digital IC Design & Verification
M2 Integration, Circuits & Systems (CentraleSupélec / IP Paris / Université Paris-Saclay). Focused on RTL microarchitecture (RISC-V), constrained-random SystemVerilog UVM verification, full RTL-to-GDSII ASIC flows (Cadence & OpenLane), and mixed-signal readout IC design.
Architected a 32-bit RV32I processor core in VHDL from first principles (ALU, 32x32 register file, immediate generator, PC datapath) and hardened it into GDSII via OpenLane / Yosys on SkyWater 130 nm PDK.
Built a self-checking SystemVerilog UVM-Lite testbench featuring constrained-random stimulus generation, SVA assertions, scoreboards, and reference models with automated Makefile regressions.
Implemented custom VHDL/Verilog MMIO peripherals over AXI-3 and Avalon-MM buses on Intel DE1-SoC and AMD/Xilinx FPGAs (Vivado). Benchmarked DMA transfers to ARM Cortex-A9 HPS using the ARM PMU.
ARM Cortex-A9 HPSAXI-3 / Avalon-MMDMA & ARM PMUVivado / Quartus
GRADUATION ASIC PROJECT2024 – 2025
Full RTL-to-GDSII Mixed-Signal ASIC Flow
Designed the digital control, measurement, and communication interface of a mixed-signal IC. Executed full RTL synthesis, placement-and-routing, and Static Timing Analysis in Cadence on X-FAB XT018 (0.18 µm).
Ultra-Low-Noise Front-End Readout IC for MEMS Micro-Pirani Sensors
Full-custom design in Cadence Virtuoso of a 50 MHz wide-swing Class-AB Folded-Cascode OTA for MEMS Micro-Pirani sensor readout, verified across PVT corners, Monte Carlo mismatch runs, and integrated noise analyses.